RCM-D Runway Closure Marker | FAA L-893(L)

This product is available in our webstore – Shop Now

Made in USA Buy American Act

Compliance with Standards

ETL Certified to FAA AC 150/5345-55 latest revision, Engineering Brief 67, with FAA AC 150/5370-2 and NTSB Safety Recommendation A-03-05.


Our Runway Closure Marker is an effective method to warn pilots of closed runways and taxiways.


• Easily set up by one person in less than 5 minutes, without tools.
• 3 year/3000 hour engine warranty.
• Four folding arms open to 14 foot length.
• 20 LED lamps deliver over 70,000 candelas at beam center.
• Visible 10-25 miles from runway under VFR.
• Selectable brightness levels to suit environmental conditions.
• Photocell dimming for night operation.
• Four rear-mounted lamps allow visual monitoring from rear side.
• Powered by a three-cylinder, liquid cooled Mitsubishi diesel engine and Marathon brushless generator.
• Operates 140 hours between fuel fills.
• Highway towable, with a standard 2″ hitch coupler.
• 2200 pound, DOT compliant trailer.
• 4 swivel leveling jacks.
• Adjustable light beam angle.
• Optional rear hitch, allows tandem towing of 2 units.
• Optional cover.

Set Up Procedure (5 minutes):

RCM D Runway Closure Marker assembly 1
1. Level as necessary using 3 leveling jacks.

RCM D Runway Closure Marker assembly 2
2. Extend the 4 light assembly arms.

RCM D Runway Closure Marker assembly 3
3. Tilt the light to the upright position.

RCM D Runway Closure Marker assembly 4
4. Start the generator and activate the lights.

Light Assembly Specifications:

• Arm length 14 feet when operating.
• Hinged to generator housing, swings upright for use, swings to horizontal position when stowed.
• Assembly arms fold to a 5’x5′ square for transport and storage.
• Arms constructed of 4″x4″ extruded aluminum, with yellow epoxy powder-coat paint.
• Twenty LED lamps mounted in front, plus 4 monitor lamps in rear, 24 total.
• LED lamp, 20 degree beam width, rated life 50,000 hours typical.
• Lamps flash 2.5 seconds on, 2.5 seconds off.
• Solid-state flasher, no mechanical contacts.
• Photocell automatically reduces intensity at night.
• 2-year warranty on light assembly, 4 years on lamps.
• Maximum Power: 630 watts, 643VA at 120VAC.

Trailer Specifications:

• 2200 pound axle.
• 2″ ball or optional pintle hitch, safety chains.
• Four 2000 lb. leveling jacks. Side jacks are on extendable 38″ outriggers.
• DOT-compliant tail and marker lights.
• Tires – ST175/80 D13, highway-rated.
• All steel tubing construction.
• Width: 67 inches.
• Length: 105 inches.
• Height: 64 inches.
• Total wet weight: 1600 lb.

Engine and Generator Specifications:

• Engine: Mitsubishi L3E Diesel, 12.7 hp, 3-cylinder, liquid-cooled, 4-stroke, 1800 RPM, electric start.
• Engine Warranty: 2 years/2000 hours on entire engine, 3 years/3000 hours on major components.
• Glow plugs and elapsed hour meter.
• Low oil/high temperature auto-shutdown.
• Generator: Marathon Electric, 6.0 kW, 120 VAC, 4-pole, brushless.
• Fuel tank capacity 57 gal., consumption 0.4 gph, 140 hour runtime.

Interested? Get a Quote

Have a product question? Need a quote? Please fill out our online quote request form.

Get a Quote