LED Elevated Runway Edge and Threshold/End Light (LERE)
Compliance
• FAA: L-862-E(L) AC150/5345-46 and EB No.67
• ICAO: Annex 14 – Volume I Fig. A2-3, A2-8, A2-9, A2-10, par. 5.3.9.8 e 5.3.9.9
• IEC: TS 61827
• NATO: STANAG 3316
• CAA: CAP 168
• TCCA: TP312
• EASA: CS-ADR-DSN, Book 1, fig. U-13, U-14, U-7, U-12
• CASA: Manual of Standard Part 139
Applications
Runway edge and threshold/end for ICAO CAT I / II / III, FAA and military runways.
Benefits
• 60,000 hours LED rated life at full intensity, but over 100,000 hours in field operating conditions.
• In new installations, LED lights mean smaller loads, smaller CCRs and transformers, thus lower life cycle costs.
• Light output is variable like a traditional halogen lamp, as indicated by FAA “Engineering Briefing No.67”.
• Colors are produced by LEDs: no colored filters ensures no energy losses and no color shifts.
• Fully compatible with existing AFL infrastructure (for monitored fixtures, isolation transformer max size: 150 VA).
• Designed with simplicity allowing longer maintenance intervals and fewer spare parts.
• Customized gasket for glass cover to avoid the use of sealing compound.
• No optical adjustment after LED module or prism replacement.
• Compatible with CCRs designed in compliance with IEC or FAA requirements.
Technical Features
• Rugged electronics built tough for high resistance to shock and vibration.
• Power supply via series circuit (2.8 – 6.6 A).
• Automatic adaptation to the 50 or 60 Hz frequency of the supply current.
• Surge protection device is provided to protect the electronics as required by FAA “Engineering Briefing No.67”.
• Continuous internal fault detection.
• Bidirectional runway edge lights include “Circular Guidance”.
• Optional fixed brightness “Circular Guidance” for white and amber lights.
• Lightweight and sturdy due to aluminum die-castings.
• Powder coat finish provides durable corrosion resistance.
• Fixture leveling provided using four external screws.
• Smaller profile improve jet blast resistance.
• IP67 protection.
• Temperature range: -55°C (-67°F) to +55°C (131°F).
Installation
• Fixture can be installed on pipe elbow, stake or baseplate.
• Specific tools available for easy and precise installation.
