I-Lux LED Taxiway and Runway Signs | FAA L-858
Downloads
Compliance
• FAA: AC 150/5345-44; Engineering Brief No. 67, ETL Certified
Features
• The average LED life is 100,000 hours at high intensity / 180,000 hours under typical operating conditions.
• Easily replaces traditional L-858 signs.
• Solidly and seamlessly integrates off-the-shelf parts and custom fabrication for strength and flexibility while minimizing operating costs.
• The platform for the cabinet is machined from solid, heavy-gauge aluminum construction.
• Free of gaps and joints that weaken modular signs and allow penetration of wind, rain, dirt, and snow.
• Inherently stronger than modular signs because it doesn’t rely on the strength of hardware used to piece modular signs together.
• I-Lux is as short as possible because it is made per FAA lettering specifications and not artificially lengthened over seams and gaps.
• AGM’s I-Lux is the only airfield sign available in half-module sizing.
• Quick and economical installation, with smaller excavation, less concrete, and fewer legs to bolt to the pad.
• Smaller obstruction in the field than modular signs, presenting less inertial load on aircraft should a collision occur.
• Seamless panels display messages without distortion.
• Highly impact-resistant, up to 30 times more than other brands.
• No tools required for relamping.
• Base model brightness controls use technology that has been proven for years in the field.
Ordering Codes
| Model | Size | Style | Light Option | Modules | Faces | Options |
|---|---|---|---|---|---|---|
| I: I-Lux |
1: Size 1 2: Size 2 3: Size 3 4: Size 4 5: Size 5 |
1: Style 1 (120-240VAC)* 2: Style 2 (4.8A-6.6A) 3: Style 3 (2.8A-6.6A) 4: Style 4 (unlighted) 5: Style 5 (5.5A) |
H: LED Board N: Unlighted |
1.0: 1.0 Module 1.5: 1.5 Modules 2.0: 2.0 Modules 2.5: 2.5 Modules 3.0: 3.0 Modules 3.5: 3.5 Modules 4.0: 4.0 Modules |
SF: Single Face DF: Double Face |
1: On/Off Switch 3: Mode 3** (If blank: Mode 2) S: LED Light Out Indicator P: View Port E: External Power Cord* |
|
* Not ETL Certified ** Mode 3 is available for Sizes 2, 3, 4, & 5 Example: I32H3.0SF1 is a size 3 L-858 I -Lux sign in style 2, with an LED light option, 3.0 modules, single face, mode 2 with an on/off switch |
||||||
I-Lux Sign Options
• On/Off Switch, Option 1 – Part Number D7-SWA, I7-SWA, I7-SWA-4:
The Isolating Safety Switch allows the guidance sign’s power control and circuitry to be isolated from the airfield constant current regulator (CCR) circuit, providing a greater measure of safety during maintenance. This allows the rest of the airfield circuitry to remain illuminated to maintain necessary visual guidance for pilots. The isolating switch is an IP67-rated, 15A bat-style toggle switch and includes a weatherproof cover that provides additional protection against mechanical damage. The I7-SWA-4 is used only on I-Lux Size 4 signs.
• Lamp Out Indicator, Option S – Part Number C7-CBLOI:
The Lamp Out Indicator is designed to aid maintenance staff in determining if a sign is not operating within specifications. The C7-CBLOI consists of an LED monitor circuit board and indicator LED. The C7-CBLOIH36 wire harness is used in conjunction with the C7-CBLOI on D-Lux signs. Per FAA Engineering Brief 67D, the system must turn off upon 25% failure of LEDs. The red Lamp Out Indicator will illuminate if this 25% threshold has been exceeded and the sign is out. This alerts maintenance staff that the LEDs within the sign require attention.
• View Port, Option P – Part Number C8-WPLG:
The View Port is designed to aid maintenance staff in verifying that the sign is illuminated. This small transparent polycarbonate plug is placed on the end of the sign closest to the pavement, allowing quick visual confirmation from passing vehicles that the sign lights are on.
